计算化学公社

标题: 量子化学购机配置请教 [打印本页]

作者
Author:
陈AG    时间: 2025-9-11 10:56
标题: 量子化学购机配置请教
本帖最后由 陈AG 于 2025-9-11 13:38 编辑

各位老师好,最近我们需要配置一个服务器,主要用于量子化学方面的计算,预算6-8万。常用软件:Gaussian,orca;计算项目:200原子内的有机分子/300原子内的二聚体/金属配合物opt,freq,激发态,过渡态等,后面可能还会涉及一点点周期性体系(吸附能等)或分子动力学的计算。平常需要计算的分子较多,每个月可能有50个左右,而且每个分子都需要计算以上项目的话,请问我照抄计算化学购机配置推荐 - 思想家公社的门口:量子化学·分子模拟·二次元sob老师的“5 顶级双路服务器推荐配置”够用吗?
ps:我是不是弄两个比较好呢,一个专门跑时间很长那种任务(磷光光谱等)




作者
Author:
tonganlhy    时间: 2025-9-11 12:56
要说明预算。如果钱够,直接两台顶级。
作者
Author:
陈AG    时间: 2025-9-11 13:39
tonganlhy 发表于 2025-9-11 12:56
要说明预算。如果钱够,直接两台顶级。

老师,预算我补充了一下,6-8万
作者
Author:
atominerva    时间: 2025-9-11 14:32
此价格可配置 3台7B13,再配个管理节点做存储。
作者
Author:
David_R    时间: 2025-9-11 18:50
If you plan to do analytical Hessian calculations on those large systems (200-300 atoms) with ORCA, I strongly recommend investing in plenty of system RAM. I would recommend 24 x 64 GB = 1.5 TB, or, if the budget is a little tight, 24 x 48 GB = 1.15 TB would also suffice.

The dual socket 9654 platform will be more than capable of meeting your expectations, and it's convenient to have this capability all in one system. The power draw at full load will be around 800-1000 W, which is quite manageable on standard electrical circuits.




欢迎光临 计算化学公社 (http://bbs.keinsci.com/) Powered by Discuz! X3.3